Antique Brass 12V Landscape Spotlight (Case of 10)

GLE Solid Brass 12V Landscape Uplight Spotlight — Case of 10 | $24.00 Each

A professional-grade solid brass 12V landscape uplight spotlight built for landscape lighting installers who need the reliability, corrosion resistance, and finished appearance of genuine brass construction across every fixture on every job — available in a case of 10 at $24.00 each for the installer quantities that make real project economics work.

The GLE solid brass uplight is the foundation fixture of a professional low voltage landscape lighting system. Ground-mounted and stake-positioned, it delivers a focused MR16 spot beam upward into trees, shrubs, facade surfaces, columns, garden features, and any architectural or landscape element that benefits from dramatic uplighting after dark. Double O-ring water sealing, a convex glass lens that prevents internal condensation, IP65 wet location rating, and solid die-cast brass construction that does not rust, corrode, or degrade in outdoor ground contact — this is the uplight you specify on premium residential installations and the one serious DIYers choose when they want professional results that last. Buy direct from GLE and get professional installer grade solid brass at a price that cuts out the distributor and middleman markup entirely.

GLE Solid Brass Uplight — Key Features:

• Solid die-cast brass construction — heavier, more durable, and more corrosion resistant than aluminum and plastic uplight alternatives. Solid brass does not rust, does not corrode in ground contact, and does not degrade in the wet soil conditions that destroy cheaper landscape spotlight fixtures within a few seasons of outdoor installation
• Double O-ring water sealing — two independent O-ring seals protect the fixture's internal components from water intrusion at every potential entry point. Double O-ring construction is a professional grade specification that single-seal and gasket-only alternatives cannot match for long-term wet location reliability
• Convex glass lens — the convex profile prevents water from pooling on the lens surface and eliminates the internal condensation that forms behind flat glass lenses in temperature-cycling outdoor environments. Condensation inside a landscape spotlight lens is one of the most common causes of premature LED bulb failure and the convex lens design eliminates it
• IP65 wet location rated — fully certified for outdoor wet location installation across all weather conditions. Rain, ground moisture, irrigation spray, and seasonal temperature cycling — IP65 means this fixture handles all of it without compromising internal component integrity
• MR16 12V LED compatible — accepts standard MR16 12V LED bulbs for focused, energy efficient, long-life uplight spot illumination. Bulb sold separately — see GLE MR16 LED replacement bulbs for compatible options
• 8.5 inch ground spike included — deep, secure in-ground spike for stable fixture positioning in landscape beds, lawn areas, and garden installations. The 8.5 inch spike depth provides secure anchoring in most soil conditions without the shallow-stake instability that causes fixtures to lean and shift over time
• 72 inch UL listed pre-wired lead wire — professional length lead wire for routing from fixture position to wire run without additional splicing at the fixture. 72 inches handles the distance from in-ground fixture position to the buried wire run in most standard landscape bed installations
• Antique bronze finish — warm, sophisticated finish that complements stone, brick, timber, and natural landscape materials without the clinical appearance of raw brass or the fading and peeling of painted finishes
• Transparent convex glass lens — the convex profile serves two functions simultaneously — preventing lens surface water pooling and eliminating internal condensation — while maintaining clean, accurate MR16 spot output without color distortion
• Adjustable aim — the fixture head adjusts to direct the MR16 spot beam at the precise angle needed for the feature being uplighted. Tree trunk base uplighting, facade washing, column accent lighting, and garden feature highlighting all require different aim angles and the adjustable head delivers precise control over beam direction
• Case of 10 installer quantity — 10 fixtures per case at $24.00 each. Enough fixtures to complete a standard residential facade and landscape uplighting installation in a single order at a per-fixture price that makes professional project margins work
• 1 year warranty — every GLE uplight is backed by a full 1 year manufacturer warranty against defects in materials and construction

The Double O-Ring and Convex Lens — Why These Two Features Matter More Than Any Other Specification:

Professional landscape lighting installers evaluate uplight fixtures on dozens of specifications. But two features separate the fixtures that perform reliably for years from the ones that generate callbacks within a single season — the water sealing system and the lens design.

Double O-ring sealing: A single O-ring seal between the lens assembly and the fixture body is the minimum standard for an IP65 rated outdoor fixture. The single O-ring works adequately when new but degrades with UV exposure, temperature cycling, and physical contact during installation and maintenance. When the single O-ring fails — and it will eventually — water enters the fixture body and the fixture fails.

The GLE double O-ring design adds a second independent seal layer. When the outer O-ring degrades the inner O-ring maintains the seal — providing a backup layer of water protection that extends reliable fixture performance significantly beyond what single-seal alternatives deliver. For a landscape lighting installer whose reputation depends on fixtures that perform correctly after installation this is not a minor specification detail — it is the difference between a system that works and a callback.

Convex glass lens: A flat glass lens on an outdoor uplight creates two problems. First, rainwater pools on the flat surface and sits against the lens seal — increasing hydrostatic pressure on the seal and accelerating degradation. Second, the temperature differential between the warm fixture interior and cool exterior air creates condensation on the interior surface of a flat lens — fogging the lens and degrading light output over time.

The convex lens profile solves both problems simultaneously. The curved surface sheds water immediately rather than allowing pooling. The convex geometry reduces the surface area in direct contact with the seal. And the optical properties of the convex profile reduce internal condensation formation. The result is a lens that stays clear, a seal that lasts longer, and a fixture that performs correctly for years rather than months.

Where to Use the GLE Solid Brass Uplight:

• Tree uplighting — position at the base of specimen trees and angle the MR16 spot beam upward into the canopy for dramatic tree uplighting that creates shadow patterns in the canopy above and defines the tree as a nighttime focal point in the landscape design
• Home facade uplighting — position in the landscape bed facing the home and angle upward to wash facade surfaces with warm uplight that highlights architectural features, material texture, and the character of the home's exterior after dark
• Column and pillar accent lighting — position at the base of entry columns, porch pillars, and architectural columns to uplight the structural elements that frame a home's entry and define its architectural character
• Garden feature and sculpture lighting — aim the adjustable spot beam at garden sculptures, water features, specimen plantings, and decorative garden elements for focused accent lighting that makes specific features stand out in the landscape at night
• Shrub and foundation planting uplighting — position in or behind foundation plantings to uplight the plant mass from below — creating depth and layering in the landscape bed that flat-lit planting beds cannot achieve
• Retaining wall and hardscape accent lighting — position at the base of retaining walls, garden walls, and hardscape features to uplight the vertical surfaces with warm focused light that highlights stone and material texture
• Commercial landscape and facade lighting — office buildings, retail storefronts, restaurants, hotels, and commercial properties where professional facade and landscape uplighting creates the curb appeal and nighttime presence that reflects the quality of the business

Case of 10 — Project Planning Guide:

Ten uplights covers a wide range of standard residential landscape lighting installation scopes. Common project configurations for a case of 10:

• Standard residential facade uplighting — 4 facade uplights on the home's front elevation plus 4 tree and shrub uplights in the front landscape bed plus 2 accent uplights on entry columns or garden features. A complete, layered front landscape lighting installation from a single case
• Large tree feature lighting — 3 uplights per large specimen tree creates a fully dimensional, multi-angle uplighting effect that single-fixture tree lighting cannot achieve. A case of 10 lights 3 large trees with one fixture remaining for an accent position
• Perimeter landscape bed lighting — 10 uplights spaced across a deep, wide landscape bed installation with multiple specimen plantings, shrubs, and garden features needing individual accent lighting positions
• Multi-zone installer stock — purchase cases to maintain van stock for immediate fixture availability on new installation jobs and service calls without waiting for individual fixture orders between jobs

GLE Solid Brass Uplight Specifications:

• Brand: GLE Georgia Lighting and Electric
• Fixture Type: Landscape uplight spotlight
• Construction: Solid die-cast brass
• Finish: Antique bronze
• Input Voltage: 12V AC/DC
• Bulb Type: MR16 12V LED (sold separately)
• Water Sealing: Double O-ring
• IP Rating: IP65 wet location rated
• Lead Wire: 72 inches UL listed SPT-1W 18 AWG
• Lens: Transparent convex glass
• Fixture Dimensions: 5 inches wide x 7.25 inches length
• Total Length with Spike: 8.5 inches
• Weight: 0.75 pounds per fixture
• Package Dimensions: 9.5 x 5 x 3 inches
• Indoor/Outdoor: Outdoor rated
• Warranty: 1 year
• Case Quantity: 10 fixtures per case
• Case Price: $240.00
• Price Per Fixture: $24.00
• Includes: Wired 12V brass uplight fixture with 72 inch lead wire, 8.5 inch ground spike

What's in the Box:

• 10 x GLE solid brass 12V landscape uplight spotlights — each pre-wired with 72 inch UL listed lead wire and 8.5 inch ground spike
• MR16 12V LED bulbs sold separately — see GLE MR16 LED replacement bulbs
• Transformer sold separately — see GLE low voltage landscape lighting transformers
• Wire sold separately — see GLE 12/2 and 14/2 low voltage landscape lighting wire

Warranty & Returns: Every GLE uplight comes with a 1 year warranty and our 30-day money-back guarantee. Any issues with your order — reach out and we'll make it right.